Incline Wheelchair Platform Lift
The Incline Wheelchair Platform Lift allows you to lift the entire wheelchair on a platform and travels up or down to the specific destination.
It can travel on either straight or curve staircase, thus the flexibility is the advantage for all stairway.
Travel on straight or curve stairway
Works extremely quiet operation and an absence of vibrations during movement.
Platform and safety handle bar can be folded out of the way when not in use.
Automatic flaps providing smooth transition to ground level. Installation indoors or outdoors. For straight or inward/outward curving stairs.
Available for stairs with constant or variable slope or requiring vertical lifting of the platform.
Track may be anchored to steps or wall. Smooth, rounded track without sharp edges or corners.
Completely lubrication-free track. Product designed and manufactured in Italy.
…………………………………………………………………….
Lift parked at lowest floor
Technical data
- Rated load 230 kg (160 kg for variable slope).
- Handle bar height from platform 800 mm.
- Speed 6 m/min.
- Single-phase power supply w/ stabilizer 200/260V.
- Max. input power 1 kW.
- Low-voltage operation.
- Suitable for indoor and outdoor installation.
Finishes
- Stair lift casing sections: silver grey.
- metal parts: dark grey.
- platform and flaps: black, non-slip.
- Dark grey track with rough finish, dark grey supports with smooth finish.
Notes
- Approximate data for max. slope 35°.
- Non-severe environmental conditions with temperatures between -5°C and +40°C.
Options
- Speed 9 m/min. (only with constant slope).
- Single-phase power supply w/ stabilizer 90/132V.
…………………………………………………………………….
Lift Parked at the highest floor
Platform
- Standard platform sizes:
* 850×700 mm.
* 850×650 mm.
- Automatic flaps on entry/exit sides for smooth transition to floor or ground: opposite, adjacent at 90° or front only.
- Balanced platform, may be folded closed by hand.
* Safety handle bar on descent side, locked in place during travel. - may be folded by hand into an upright position.
Platform Options
- Special platform dimensions:
* small 850 x 600 mm.
* large 950 x 750 mm.
* extra large 1000 x 800 mm. - Motorized platform fold-up mechanism.
- Jointed folding safety handle bar.
- Folding seat kit to accommodate one person sitting.
- Fixed arm rest bar for standing person.
- Protective grey PVC cover.
…………………………………………………………………….
Able to travel and turn on curves
Controls
- All controls for moving the lift are of the continuous pressure type.
- Up and down controls installed on an extend able panel, may also be used by an accompanying person.
- On/off switch with extractable key.
Control Options
- Call and return to floor push buttons, enabled when the lift is folded closed;
- key-operated selector for enabling controls (platform opening and closing controls - only for motorized type).
- Floor stands for landing controls.
…………………………………………………………………….
Can be installed at outdoor
Guide track
- Installable on the inside or outside turn of the staircase.
- Suitable for straight and curved stairs, also “S” shaped.
- Manufactured from extruded steel profile with rounded edges, smooth, no sharp edges or corners.
- Rough paint finish, dry surface completely free of oil or grease.
- Mounted by means of supports with fastening plate secured by anchor screws to stair risers.
Guide Track Options
- Anchorage by means of wall mounting plates (reinforced concrete only).
- Stainless steel track.
- Galvanized track supports.
- Balanced track section which may be folded up by hand at the bottom landing.
…………………………………………………………………….
Enable users to fold up and park at the side when not using
Safety features
- Pressure-sensitive buffers at the sides and below the lift body, beneath the platform and on the edges corresponding to the directions of travel.
- Handwheel for manual emergency lowering.
- Safety handle bar manual release device.
- Safety brake and overspeed governor.
- Emergency stop switch.
- Electric and mechanical track limit stops.
Safety Feature Options
- Battery for emergency lowering in the event of a power failure.
- Kit for installing flashing indicators along stairway.
- Flashing light indicators to signal when lift is in transit.
- Audible alert to signal when lift is in transit.
- Flashing indicator on lift.
…………………………………………………………………….
Incline Platform Lift with a Wheelchair
Type
- The characteristics of the installation site will determine the feasibility and type of installation.
- All options are applicable subject to technical compatibility.
- Right-side version, Installed on right side of staircase/ramp (from the bottom looking up).
- Left-side version, Installed on left side of staircase/ramp (from the bottom looking up).
…………………………………………………………………….
Floor Stands for landing control
Conformity
The stair lift model MCP complies with the requirements of:
- European Directive 98/37/EC Machinery Directive.
- European Directive 2004/108/EC Electromagnetic Compatibility Directive.
- European Directive 2006/95/EC Low Voltage Directive Italian Public Works Ministry Decree no. 236/89 on the removal of architectural barriers.
…………………………………………………………………….
Side view
Not included
The buyer is responsible for:
- Providing a dedicated power line to our cabinet, duly equipped with a thermal magnetic differential circuit breaker and earth connection.
- Providing internal wall ducts and/or external ducting to carry all the electrical lines (e.g.: power supply cabinet - track, track - landing controls)
- Any necessary masonry work
- Ensuring the solidity of anchorage and support structures (steps, walls, etc.)
…………………………………………………………………….
Handle can be folded into proper position
Power supply cabinet
- Dimensions of standard cabinet 365×350x210 mm (h x w x d).
- Dimensions of emergency battery kit 300×380x180 mm (h x w x d).
- Max distance between cabinet and track 5 m.
Note
- The power supply cabinet and battery kit are not designed for recessed wall mounting!
Power line
- Thermal magnetic differential circuit.
- breaker: current rating 10A, trip sensitivity 30mA.
- Main power supply cable min. 3×1.5 mm2 with earth connection.
- Power cable between cabinet and track min. 2×6 mm2.
- Minimum diameter of duct tubing for cables 20mm.
…………………………………………………………………….
IPL
Landing controls
- Dimension of call and return to floor pushbutton box, standard: 110×75x60 mm (h x w x d).
- Size of boxes for call and return to floor buttons+platform opening/closing controls: 135×75x70 (h x w x d).
- Box height above floor between 900 and 1100 mm.
- Distance between landing controls and point of access to lift (entry/exit): recommended 0.5 - 1.5 m.
- The landing controls must be positioned so as to allow maximum visibility of the lift while it is in transit and avoid interference with use of the lift itself.
- (e.g. while platform is being folded down)
Line connecting to landing controls:
- Power cable to landing controls 2×1mm2.
- Minimum diameter of duct tubing for cable to landing controls 20mm.
…………………………………………………………………….
Characteristics of support and anchorage structures:
- Anchorage to step (riser): 2 screw anchors min. capacity 80 kg each
- Anchorage to wall (reinforced concrete only): 3 screw anchors; 2 upper ones min. capacity of 260 kg ea.
